我做了Lab :
Server1 :
Name :W2003DC1
IP :
NAT->IP : 192.168.112.111
Submask 255.255.255.0
Gateway 192.168.112.2
DNS 192.168.112.111, 192.168.112.112
HOST->IP 192.168.206.111
Submask 255.255.255.0
SERVER2 :
NAME:W2003DC2
IP :
NAT->IP : 192.168.112.111
Submask 255.255.255.0
Gateway 192.168.112.2
DNS 192.168.112.111, 192.168.112.112
HOST->IP 192.168.206.111
Submask 255.255.255.0
XP :
Name : XPCLIENT
IP : DHCP Client (HOST)
VMWare DHCP Config :
:
# Virtual ethernet segment 1
# Added at 01/13/05 11:11:21
subnet 192.168.206.0 netmask 255.255.255.0 {
range 192.168.206.128 192.168.206.254; # default allows up to 125 VM's
option broadcast-address 192.168.206.255;
option domain-name-servers 192.168.206.112, 192.168.206.111;
option routers 192.168.206.112;
#option domain-name-servers 192.168.206.1;
option domain-name "localdomain";
default-lease-time 1800;
max-lease-time 7200;
}
host VMnet1 {
hardware ethernet 00:50:56:C0:00:01;
fixed-address 192.168.206.1;
option domain-name-servers 0.0.0.0;
option domain-name "";
}
# End
:
Install Steps:
1. Install Windows 2003 E.E Operation System. (Server 1)
2. Run sysprep. 清除系统参数. Shutdown the system.
3. 拷贝Vmware Files 产生另一个 Server.
4. 执行 Server 1，建立 Active Directory & DNS (利用预设值)，但是在建立DNS时要设将DNS Request 转寄至 餘.168.112.2' (VMWare 安装后所建 DNS Server IP)
5. 设定 Route and Remote Access. 将网段转接 192.168.206.x --> 192.168.112.x.
6. 建立反向对应区域，建立 New Zone 餘.168.112.x' 餘.168.206.x'，1并建立 New PTR (A Host)
7. 执行 Server 2，建立第二个 Active Directory (选择现有网域)
8. 建立 DNS ，设定相同网域并设定转接 DNS Request 至 餘.168.112.2'，因我建第一个DNS时设定复制至所有DC，所有打开DNS Tool 应该资料与Server 1一样。
9. 设定 Route and Remote Access. 将网段转接 192.168.206.x --> 192.168.112.x
10. 执行 XPClient, Join Domain (DNS 设为 Integrated ..., 所以要不然 nslookup 会有问题)
11. Open IE --> OK.
Trouble Shooting:
1. nslookup --> 反向对应区域
2. Client 无法上网--> Route and Remote Access --> DNS Forwarding
所有 IP值可能不同请以此类推。
