我先试试看
有问题再问大家

现在Server和Client之间的网路通了
但是现在只有Server可以连上Internet
例如Client1
ping DC1结果如下
Pinging 192.168.1.1 with 32 bytes of data:

Reply from 192.168.1.1: bytes=32 time<1ms TTL=128
Reply from 192.168.1.1: bytes=32 time<1ms TTL=128
Reply from 192.168.1.1: bytes=32 time<1ms TTL=128
Reply from 192.168.1.1: bytes=32 time<1ms TTL=128

Ping statistics for 192.168.1.1:
  Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
  Minimum = 0ms, Maximum = 0ms, Average = 0ms
==============================================
ping DC2结果如下
Pinging 192.168.1.2 with 32 bytes of data:

Reply from 192.168.1.2: bytes=32 time=2ms TTL=128
Reply from 192.168.1.2: bytes=32 time<1ms TTL=128
Reply from 192.168.1.2: bytes=32 time<1ms TTL=128
Reply from 192.168.1.2: bytes=32 time<1ms TTL=128

Ping statistics for 192.168.1.2:
  Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
  Minimum = 0ms, Maximum = 2ms, Average = 0ms
==============================================
nslookup的结果如下
*** Can't find server name for address 192.168.1.1: Non-existent domain
*** Can't find server name for address 192.168.1.2: Non-existent domain
*** Default servers are not available
Default Server: UnKnown
Address: 192.168.1.1
=================================================
ipconfig/all 结果如下
Windows IP Configuration

    Host Name . . . . . . . . . . . . : Taipei
    Primary Dns Suffix . . . . . . . : nwtraders.msft
    Node Type . . . . . . . . . . . . : Unknown
    IP Routing Enabled. . . . . . . . : No
    WINS Proxy Enabled. . . . . . . . : No
    DNS Suffix Search List. . . . . . : nwtraders.msft

Ethernet adapter Local Area Connection:

    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : VMware Accelerated AMD PCNet Adapter

    Physical Address. . . . . . . . . : 00-0C-29-66-A1-06
    Dhcp Enabled. . . . . . . . . . . : No
    IP Address. . . . . . . . . . . . : 192.168.1.101
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    Default Gateway . . . . . . . . . : 192.168.1.2
    DNS Servers . . . . . . . . . . . : 192.168.1.1
                                192.168.1.2
==============================================
ping Giga Cable Modem的DNS
Server端正常
Client端结果如下
Pinging 203.133.1.6 with 32 bytes of data:

Request timed out.
Request timed out.
Request timed out.
Request timed out.

Ping statistics for 203.133.1.6:
  Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),

ping另一个DNS

Pinging 203.133.1.8 with 32 bytes of data:

Request timed out.
Request timed out.
Request timed out.
Request timed out.

Ping statistics for 203.133.1.8:
  Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),
==============================================
有办法从以上的资料看出是哪里有问题吗?
要如何做修正呢?

1. 检查 DNS 中DC1 & DC2 对照表(正反向)
2. 不知道市否有否修改VmWare Networkwork Configuration,预设x.x.x.1 应该为该网段Defatul Gateway.
3. PING 封包未出去,请检查 DC2 (Gateway for Client) 及 Vmware Network Configuration.

既是作Lab 应该不用每台都上Internet .达到解答就可以.

对不起
我才学到2274刚开始
所以很多我都还不懂
以致于你所说的
我不知道该怎么做
1.对照表要从哪看?
2.这要到哪里设定?
3.要怎么检查啊?
可否详细说明
因为我想要把问题解决
从中获得经验
不管是以后考试也好
还是以后工作上
或许会有同样的问题发生
谢谢!!

先Check VmWare Network Configuration , two methods:
1. 程式集-->VmWare-->VmWare Workstation-->Manage Virtual Network
2. VmWare Workstation Menu --> HOST-->Virtual Network Setting

你可以确认 Vmnet0(Bridged), vmnet1(Host-Only), vmnet8(NAT) DHCP 提供之预设IPs是否有冲突.理论上 Client DNS 设为 DC2 & DC1, DNS 也允许Dymanic Update 在DNS dnsmgmt应可看到所有设备名称及IP,若没有表示有问题.

nslookup 所显示讯息非问题所在,你可
nslookup
>server 192.168.1.1 <------ 指定 Default Server

测正向名称解读, 在 "Rervse Lookup Zones" 定义New Zones - "1.168.192.in-addr.arpa" 然后定义New Pointer (PTR)将 192.168.1.1 & 192.168.1.2 HOST Name 定义就ok. 若有问题多订一各Domain Name for this Zones.

至于PING 问题较广,就自己看着办.

PING 应该是Default GateWay 的问题, Check 是不是有冲突, 在我的Lab Vnet8 DHCP 有一点发疯, 192.168.1.x 之Default Gateway 是 192.168.73.2.

我的是192.168.64.2
正确应该是多少啊?

是否确认 Vnet0(Hot-only) 及 Vnet8(NAT) 所提供之网段数值?
若与你期望要填的网段不同先在Virtual Network Setting 更改，举例：若安装好之Vmware Vnet8 所提供DHCP 网段为 192.168.77.x ，基本上它所指定之 Gateway 为 192.168.77.2 ，上一回覆主要我所碰到之问题；若192.168.64.2 为你 Vmware 所定义之Gateway，那请Review 所有 OS 所定义之网段是不是与VmWare 所定义之Virtual Network 网段相当。若要以 MCSE教材为主请更改Virtual Network 网段之值。

我的数值如下
VMnet0(Bridged)

VMnet1(Host-only)
Subnet:192.168.239.0
Netmask:255.255.255.0
Start IP address:192.168.239.128
End IP address:192.168.239.254
Broadcast address:192.168.239.255

VMnet8(NAT)
Subnet:192.168.64.0
Netmask:255.255.255.0
Start IP address:192.168.64.128
End IP address:192.168.64.254
Broadcast address:192.168.64.255
Gateway IP adress:192.168.64.2
照你说的话
我要以MCSE教材为主
是要把VMnet8(NAT)
改成以下这样:
Subnet:192.168.1.0
Netmask:255.255.255.0
Start IP address:192.168.1.1
End IP address:192.168.1.254
Broadcast address:192.168.1.255
Gateway IP adress:192.168.1.2
对吗?

Yes. 改完再重新启动Service 就ok. 不过XP Client 是直接由Vmware Gateweay --> HOST-->NIC--> Internet. 若要XP Client 由 DC-2 转出则要另外改完两个网段(HOST-Only, NAT). 先试通再说